Red Thread HP

Method of Construction
Filament-wound pipe to ASTM D2996, filament-wound, compression/contact molded fittings to ASTM D5685, filament-wound/compression molded flanges to ASTM D4024
Resin
Thermosetting aromatic amine cured epoxy
Internal Corrosion Barrier
Unlined
Primary Joining Method
Threaded and bonded (T.A.B.) joint (2-6″), matched tapered bell x spigot joint
Diameter Range
2″ – 42″
Pressure Range
16 bar (Red Thread HP16)
25 bar (Red Thread HP25)
Temperature
93°C (200°F), up to 99°C (210°F) by derating pressure

Document Library

Red Thread HP
Document Type Size Last Updated
CI1200 - RTHP16 Product Data - August 2023 application/pdf 311.32 KB
CI1201 - RTHP16 Specification Guide - August 2016 application/pdf 95.87 KB
CI1220 - RTHP20 Product Data - September 2017 application/pdf 453.31 KB
CI1265 - RTHP25 Product Data - May 2023 application/pdf 634.28 KB
CI1266 - RTHP25 Spec Guide - August 2016 application/pdf 96.07 KB
CI1275 - RTHPFM Product Data - April 2023 application/pdf 689.82 KB
CI1350 - HP16 Fittings 1-16in - August 2017 application/pdf 697.13 KB
CI1351 - HP16 Fittings 18-42in - June 2016 application/pdf 240.22 KB
CI1360 - HP25 Fittings - November 2016 application/pdf 289.23 KB
CI1370 - HP32-40 Fittings - June 2017 application/pdf 238.61 KB
CI1375 - HP35 Fittings - October 2018 application/pdf 135.13 KB
INS1000 - Matched Tapered BxS Joint Installation Manual - June 2023 application/pdf 4.05 MB
View full document library