Green Thread HP

Method of Construction
Filament-wound pipe to ASTM D2996, filament-wound, compression/contact molded fittings to ASTM D5685, filament-wound/compression molded flanges to ASTM D4024
Resin
Thermosetting aromatic amine cured epoxy
Internal Corrosion Barrier
Reinforced resin-rich corrosion barrier, 20 mil (0.020″)
Primary Joining Method
Matched tapered bell x spigot joint
Diameter Range
1″ – 42″
Pressure Range
16 bar (Green Thread HP16)
25 bar (Green Thread HP25)
32 bar (Green Thread HP32)
40 bar (Green Thread HP40)
Temperature
93°C (200°F), up to 110°C (230°F) by derating pressure

Document Library

Green Thread HP
Document Type Size Last Updated
CI1300 - GTHP16 Product Data - June 2023 application/pdf 674.08 KB
CI1301 - GTHP16 Spec Guide - August 2016 application/pdf 95.82 KB
CI1320 - GTHP20 Product Data - February 2017 application/pdf 215.64 KB
CI1325 - GTHP25 Product Data - April 2022 application/pdf 466.48 KB
CI1326 - GTHP25 Spec Guide - January 2017 application/pdf 95.94 KB
CI1330 - GTHP32 Product Data - February 2017 application/pdf 205.56 KB
CI1340 - GTHP40 Product Data - February 2017 application/pdf 203.21 KB
CI1350 - HP16 Fittings 1-16in - August 2017 application/pdf 697.13 KB
CI1351 - HP16 Fittings 18-42in - June 2016 application/pdf 240.22 KB
CI1360 - HP25 Fittings - November 2016 application/pdf 289.23 KB
CI1370 - HP32-40 Fittings - June 2017 application/pdf 238.61 KB
INS1000 - Matched Tapered BxS Joint Installation Manual - June 2023 application/pdf 4.05 MB
View full document library